| | |
| Type | Phaser |
| +9V POWER INPUT | Accepts standard 9 volt power adaptors (power adaptor included). |
| AUDIO IN | 1/4" phone jack - accepts any instrument-level or line-level audio signal from -16 dBm to +4 dbm. |
| AUDIO OUT | 1/4" phone jack - -4 dBm nominal output level. |
| AUX AUDIO IN | Provides a means of applying an external signal to the ring modulator, in place of the carrier oscillator. |
| BYPASS | Two-color LED that tells whether the ring modulator is on or bypassed. |
| CARRIER OUT | Delivers the carrier signal for use by other devices. |
| DRIVE | Rotary control, which adjusts the gain of the audio input. |
| FREQUENCY | Rotary control, which varies the carrier frequency over a six-octave range. |
| FREQUENCY, RATE, LFO AMOUNT, MIX | All of which are stereo 1/4" jacks that accept moogerfooger EP1 (or equivalent) expression pedals, or control voltages from two-circuit or three-circuit 1/4" jacks. |
| LEVEL | Three-color LED that is used to set the DRIVE control. |
| LFO | LED that indicates the LFO rate. |
| LFO AMOUNT | Rotary control, which adjusts the amount that the LFO output sweeps the carrier oscillator. |
| LFO OUT | Delivers the LFO voltage for use by other voltage-controlled devices. |
| LO-HI | Rocker switch, which chooses between the low frequency carrier range (2 Hz to 130 Hz) and the high frequency carrier range (60 Hz to 4,000 Hz). |
| MIX | Rotary control, which crossfades continuously from unmodulated to modulated audio. |
| ON/BYPASS | Rugged, smooth-acting ‘stomp switch.’ |
| RATE | Rotary control, which varies the LFO’s frequency from 0.1 Hz to 25 Hz. |
| SQUARE-SINE | Rocker switch, which chooses the LFO waveform. |