CDR 632
Overview
Marantz took care to pack the CDR632 with features specifically requested by the installation market like Programmable Auto-Track Increment, Pitch Control, Level dependent Sync Recording, Single Play Mode, Power-on Play and more. Analog, digital and optical input and output, complete with integrated sample rate conversion, are just a few examples of the meticulous design and engineering that went into the CDR632. CD-text can be programmed and read right from the front panel. Programmable fade-in/fade out recording allows your clients recording technique to be as good as their Marantz Professional CD-R sounds and the list goes on. |
Standard Features
| | |
| Analog Inputs | Unbalanced Input RCA; Nominal Input Level -10 dBV (at full scale: -16 dB); Minimum Input Level -19 dBV or higher (minimum input level that can be adjusted to nominal level (full scale - 16 dB)); Input Impedance 22 kHz +/- 105 (unbalanced) |
| Analog Outputs | Unbalanced Input RCA Phono; Nominal Output Level -10 dBV +/- 2 dB (at full scale: -16 dB); Maximum Output Level +6 dBV +/- 2 dB; Output Impedance 600 +/- 10% (unbalanced) |
| Channel Separation | 90 dB or better (playback: 1 kHz); 80 dB or better (recording: 1 kHz) |
| Current Consumption | 18 W |
| Digital Output | Coaxial RCA Phono (IEC-60958 Type II); Optical Toslink (IEC-60958 Type II) |
| Dimensions | 19 x 3.9 x 12.11 inches (W x H x D) |
| Distortion | 0.006% or less (playback); 0.008% or less (recording) |
| Dynamic Range | 95 dB or better (playback); 90 dB or better (recording) |
| Frequency Response | 20Hz-20kHz +/-0.8 dB (playback); +/-1.0 dB (recording) |
| Phones Output | Stereo Phone Jack (1/4"); 20 mW or greater 32 load |
| Power Supply | 120 VACO, 60 Hz |
| Quantization Bit Depth | 16-bit linear |
| Recordable Discs | CD-R, CD-RW |
| S/N | 95 dB or better (playback); 90 dB or better (recording) |
| Sampling Frequency | 44.1 kHz |
| Weight | 10.8 lbs. |
| Wow and Flutter | Below Measurable Limits (less than 0.001%) |
|
|