| | |
| Bass cut filter slope | 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz |
| Connector | 3-pin XLR to IEC |
| Current consumption | approximately 4.5 mA |
| Dimensions | 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.) |
| Dynamic range | 134 dB minimum |
| Environment | Temperature range: -10° C to +60° C (14° F to 140° F) Relative humidity: 95% (+20° C/68° F), 85% (+60° C/140° F) |
| Equivalent noise level | 6 dB-A (0 dB preattenuation) (DIN 45 412, A-weighted) |
| Equivalent noise level (CCIR 468-2) | 20 dB (0 dB preattenuation) |
| Frequency range | 20 to 20,000 Hz (see frequency response traces) |
| Impedance | <=200 ohms |
| Max. SPL | 200/400/800/1600 Pa = 140/146/152/158 dB SPL (0/-6/-12/-18 dB) (for 0.5% THD) |
| Net weight | 300 g (10.6 oz.) |
| Polar pattern | Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight |
| Preattenuation pad | -6 dB, -12 dB, -18 dB, switchable |
| Recommended load impedance | >= 2,200 ohms |
| Sensitivity | 23 mV/Pa (-33 dBV) ± 0.5 dB |
| Signal/noise ratio (A-weighted) | 88 dB |
| Supply voltage | 48 V phantom power to DIN/IEC |
| Type | 1-inch large-diaphragm pressure gradient microphone |